Plugs into any power receptacle to record basic voltage disturbance events.
Typical applications include:
Traffic signal monitoring at Intersections
IT Server Rooms
Home Automation systems
Sensitive electrical equipment power source quality
220 volt for Australia, United Kingdom & European Shuko receptacles
EventReader software provides easy to understand graphs
LED flashing light when an event is recorded.
Affordable enough to deploy several loggers around your building to monitor several branches.
Conduct high-level diagnosis of your building’s power quality without hiring an electrician.
Hot to Neutral:45 to 65 Hz
Hot to Neutral: +/- 0.1 Hz (3 cycles minimum)
Hot to Neutral: 100 to 2500 V peak
Neutral to Ground: 50 to 2500 V peak
Hot to Neutral: +/- 10% of reading + resolution
Neutral to Ground: +/- 10% of reading + resolution
Hot to Neutral: 10 V
Neutral to Ground: 10 V
Hot to Neutral: 1 µsec minimum
Neutral to Ground: 1 µsec minimum
Phase Angle Accuracy:
Hot to Neutral: +/- 1° (20 to 180°, 200 to 360°)
Neutral to Ground: +/- 1° (20 to 180°, 200 to 360°)
Phase Angle Resolution:
Hot to Neutral: 1°
Neutral to Ground:1°
Surge, Sag & Outage
Hot to Neutral: +/- 1 V rms + resolution
Neutral to Ground: +/- 1 V rms + resolution
Hot to Neutral: 0 to 200 V rms
Neutral to Ground: 3 to 200 V rms
Hot to Neutral: 1 V rms
Neutral to Ground: +/- 1 V rms
Time Stamp (< 1 sec)
Hot to Neutral: +/- 2 seconds/day + resolution
Hot to Neutral: 8 seconds
Hot to Neutral: 3 – years
Time Stamp (> 1 sec)
Hot to Neutral: +/- 0.5 cycle
Neutral to Ground: +/- 1 cycle
Hot to Neutral: 8 seconds
Neutral to Ground: 1 cycle
ACR softwares are powerful, easy and intuitive that opens a window into the analysis of your data collected. Data can be viewed in various formats and presentation quality graphs can be exported into any WORD program. The software provides electronic records for a reduced paper trail.
Data loggers are often used in highly regulated environments such as food and pharmaceutical production and storage where strict safety regulations apply. Regulatory agencies generally require proof of calibration.
ACR calibrations are performed using reference standards that have been calibrated and are traceable to the US National Institute of Standards & Technology (NIST). This ensures that all ACR data loggers meet, and perform to, their published specifications, allowing you to be confident that they will assist you in achieving your compliance requirements.
Calibration certificates are provided with every calibration we perform. ACR Systems is an ISO 9001:2015 registered company and calibration records are kept as part of our quality system and can be made available for customer audits.