USD

Product, Order & General Inquiries +1 (800) 663-7845 (8am-4:30pm PST)

Your cart is currently empty.

Line Splitter Multiplier - AC Current - For Appliance Monitoring
Request a Quote Schedule a Demo Request a Call
Call ACR Now Call ACR: 1-800-663-7845
North America: 1-800-663-7845
International: +1-604-591-1128
Mon–Fri 8:30 AM – 4:30 PM PT
The AC Line Splitter / Multiplier (Model ALS-1) makes it easy to measure current on plug-in appliances using the SRX3 AC Current Logger. It temporarily separates the hot and neutral conductors—eliminating the cancellation effect in standard power cords—so you can take accurate clamp-on current measurements without any rewiring. Simply plug the splitter into the outlet for a safe, clean measurement point. Two clamp positions are provided: X1 for direct readings, and X10 for enhanced sensitivity, allowing precise monitoring of even low-current devices.

Key Features

  • Hot/neutral separation - Allows the clamp-on CT to go around only the hot conductor, avoiding cancellation error when both hot & neutral are enclosed together.
  • Built-in 10× multiplier - Enables measurement of lower-current devices by multiplying the measurable current so that your logger/CT sees a higher reading – improving resolution/sensitivity.
  • Plug-in device for convenience - No rewiring required; the splitter simply sits between the receptacle and the equipment under test.
  • North American version (120 V / 60 Hz) - Designed for standard North American convenience outlets, so compatibility is assured.
SKU: 38-0002
$65.00 USD

Guaranteed safe checkout

american expressdiners clubdiscovermasterpaypalvisa
Description Software Q&A

Safely and easily measure AC current on standard plug-in appliances — even very low currents.

Product Description

Most small appliances use a standard power cord that contains both the hot and neutral conductors bundled together. When you place a clamp-on current transducer (CT) around the entire cord, the opposing currents cancel each other out, giving you no reading at all.
The Line Splitter Multiplier solves this problem.

This compact accessory plugs in-line between an appliance and a North American 120 V outlet. It separates the hot conductor from the neutral so a clamp-on CT can measure the hot line directly — without any rewiring, cutting, or exposing wires.

The splitter also includes a built-in 10× current multiplier. This allows low-current devices to produce a stronger, more measurable signal. For example:

  • A device drawing 5–12 A becomes equivalent to 50–120 A when using the 10× multiplier

  • This lets you use a 250 A Current Transducer with excellent sensitivity

  • TrendReader TRX Software can automatically correct the reading using a custom equation (simply divide by 10)

This Line Splitter is rated for up to 15 Amps, matching standard North American outlet limits.

Key Features

1. Enables Current Measurement on Standard Appliance Cords

  • Separates hot and neutral conductors internally

  • Prevents the cancellation effect that makes clamp-on CTs read “zero” on standard cords

  • Ideal for plug-in appliances, tools, and electronic equipment

2. Built-In 10× Current Multiplier

  • Boosts low-current readings for more accurate measurement

  • Greatly improves resolution when monitoring small or variable loads

  • TrendReader can automatically scale results using a simple divider (÷10)

3. Plug-In Convenience (No Rewiring Required)

  • Simply place the splitter between the outlet and the appliance

  • No cutting, splicing, or modifying cords

  • Safer and faster for technicians, engineers, and auditors

4. Works With ACR Current Transducers & Loggers

  • Perfect for integrating with ACR’s AC Current Transducer (e.g., 250 A model)

  • Provides the clean, isolated hot-line conductor needed for proper clamp measurements

5. 15-Amp Rated

  • Suitable for most small appliances and office equipment

  • Matches the rating of typical North American 120 V circuits

6. Standard North American Design

  • 120 V / 60 Hz

  • Three-prong plug and outlet

Technical Specifications

  • Maximum load: 15 A

  • Multiplier tap: 10×

  • Standard tap: 1× (direct hot conductor)

  • Plug Type: NEMA 5-15P to NEMA 5-15R

  • Frequency: 50/60 Hz compatible

  • Designed for: AC clamp-on meters and current transducers

Software

ACR software tools are intuitive and flexible, allowing you to easily configure ACR data loggers to collect the data you need. Once downloaded, your data is displayed in presentation-quality graphs and can be converted into popular formats for use with spreadsheet programs, document editors, and other third-party applications.

Q&A

Q: Why would I need a Line Splitter / Multiplier when using a clamp-on current probe?

A: A clamp-on probe measures the magnetic field created by current flowing through a single conductor. But on a typical two-conductor appliance cord (hot + neutral), the currents flow in opposite directions and cancel each other out, resulting in a reading of zero amps. The Line Splitter / Multiplier solves this by separating the conductors so your clamp-on probe can measure the hot or neutral line independently.

Q: How does the Line Splitter / Multiplier help with measuring small appliance currents?

A: Many clamp-on current probes are designed for large currents and don’t have enough resolution to measure appliance loads accurately. This accessory includes a built-in 10× multiplier:

  • Place your clamp around the 10× loop
  • The reading is amplified 10×
  • You then divide by 10 in software (or mentally) to get the actual appliance current

This allows a high-range probe to measure very small currents reliably.

Q: Why can’t I measure appliance current directly with the SRX3 and a clamp-on probe?

A: Because the SRX3 only measures the signal coming from the sensor—it cannot physically separate conductors in a power cord. Without the Line Splitter, placing a clamp on a two-wire cord will always give zero, because the hot and neutral magnetic fields cancel each other. The Line Splitter provides a safe, non-intrusive way to separate the conductors so the SRX3 can receive a meaningful signal from your probe.

Q: How do I use the Line Splitter / Multiplier with the SRX3 Current Logger?

A: Follow these steps:

  1. Plug the appliance into the Line Splitter.
  2. Clamp your current probe around either the single-conductor output or the 10× coil.
  3. Connect the probe’s voltage output (0–5 V) to one of the SRX3’s input channels.
  4. In TRX software, apply the correct scaling (e.g., divide by 10 for the multiplier loop).
  5. Start logging.

Q: What kinds of devices is this accessory meant for?

A: Any plug-in electrical appliance, including:

  • Refrigerators & freezers
  • Vending machines
  • Office equipment
  • Small plug-in motors
  • Computers & monitors
  • Lab equipment
  • Anything that plugs into a standard North American outlet

If it plugs in, this accessory makes it measurable.

Calibration

Data loggers are often used in highly regulated environments such as food and pharmaceutical production and storage where strict safety regulations apply. Regulatory agencies generally require proof of calibration.

ACR calibrations are performed using reference standards that have been calibrated and are traceable to the US National Institute of Standards & Technology (NIST). This ensures that all ACR data loggers meet, and perform to, their published specifications, allowing you to be confident that they will assist you in achieving your compliance requirements.

Calibration certificates are provided with every calibration we perform. ACR Systems is an ISO 9001:2015 registered company and calibration records are kept as part of our quality system and can be made available for customer audits.

Calibration Service

{"id":6149853511851,"title":"Line Splitter Multiplier - AC Current - For Appliance Monitoring","handle":"line-splitter-multiplier-ac-current","description":"\u003cp data-end=\"317\" data-start=\"220\"\u003e\u003cstrong\u003eSafely and easily measure AC current on standard plug-in appliances — even very low currents.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"348\" data-start=\"319\"\u003e\u003cstrong data-end=\"346\" data-start=\"323\"\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"679\" data-start=\"349\"\u003eMost small appliances use a standard power cord that contains both the hot and neutral conductors bundled together. When you place a clamp-on current transducer (CT) around the entire cord, the opposing currents cancel each other out, giving you \u003cem data-end=\"622\" data-start=\"603\"\u003eno reading at all\u003c\/em\u003e.\u003cbr data-end=\"626\" data-start=\"623\"\u003eThe Line Splitter Multiplier solves this problem.\u003c\/p\u003e\n\u003cp data-end=\"936\" data-start=\"681\"\u003eThis compact accessory plugs in-line between an appliance and a North American 120 V outlet. It separates the hot conductor from the neutral so a clamp-on CT can measure the hot line directly — without any rewiring, cutting, or exposing wires.\u003c\/p\u003e\n\u003cp data-end=\"1095\" data-start=\"938\"\u003eThe splitter also includes a built-in 10× current multiplier. This allows low-current devices to produce a stronger, more measurable signal. For example:\u003c\/p\u003e\n\u003cul data-end=\"1384\" data-start=\"1097\"\u003e\n\u003cli data-end=\"1193\" data-start=\"1097\"\u003e\n\u003cp data-end=\"1193\" data-start=\"1099\"\u003eA device drawing 5–12 A becomes equivalent to 50–120 A when using the 10× multiplier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1273\" data-start=\"1194\"\u003e\n\u003cp data-end=\"1273\" data-start=\"1196\"\u003eThis lets you use a 250 A Current Transducer with excellent sensitivity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1384\" data-start=\"1274\"\u003e\n\u003cp data-end=\"1384\" data-start=\"1276\"\u003eTrendReader TRX Software can automatically correct the reading using a custom equation (simply divide by 10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1481\" data-start=\"1386\"\u003eThis Line Splitter is rated for up to 15 Amps, matching standard North American outlet limits.\u003c\/p\u003e\n\u003chr data-end=\"1486\" data-start=\"1483\"\u003e\n\u003ch2 data-end=\"1506\" data-start=\"1488\"\u003e\u003cstrong data-end=\"1506\" data-start=\"1490\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3 data-end=\"1576\" data-start=\"1508\"\u003e\u003cstrong data-end=\"1574\" data-start=\"1512\"\u003e1. Enables Current Measurement on Standard Appliance Cords\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1787\" data-start=\"1577\"\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003eSeparates hot and neutral conductors internally\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003ePrevents the cancellation effect that makes clamp-on CTs read “zero” on standard cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1787\" data-start=\"1724\"\u003e\n\u003cp data-end=\"1787\" data-start=\"1726\"\u003eIdeal for plug-in appliances, tools, and electronic equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1833\" data-start=\"1789\"\u003e\u003cstrong data-end=\"1831\" data-start=\"1793\"\u003e2. Built-In 10× Current Multiplier\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2042\" data-start=\"1834\"\u003e\n\u003cli data-end=\"1895\" data-start=\"1834\"\u003e\n\u003cp data-end=\"1895\" data-start=\"1836\"\u003eBoosts low-current readings for more accurate measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1967\" data-start=\"1896\"\u003e\n\u003cp data-end=\"1967\" data-start=\"1898\"\u003eGreatly improves resolution when monitoring small or variable loads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2042\" data-start=\"1968\"\u003e\n\u003cp data-end=\"2042\" data-start=\"1970\"\u003eTrendReader can automatically scale results using a simple divider (÷10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2099\" data-start=\"2044\"\u003e\u003cstrong data-end=\"2097\" data-start=\"2048\"\u003e3. Plug-In Convenience (No Rewiring Required)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2271\" data-start=\"2100\"\u003e\n\u003cli data-end=\"2166\" data-start=\"2100\"\u003e\n\u003cp data-end=\"2166\" data-start=\"2102\"\u003eSimply place the splitter between the outlet and the appliance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2211\" data-start=\"2167\"\u003e\n\u003cp data-end=\"2211\" data-start=\"2169\"\u003eNo cutting, splicing, or modifying cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2271\" data-start=\"2212\"\u003e\n\u003cp data-end=\"2271\" data-start=\"2214\"\u003eSafer and faster for technicians, engineers, and auditors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2330\" data-start=\"2273\"\u003e\u003cstrong data-end=\"2328\" data-start=\"2277\"\u003e4. Works With ACR Current Transducers \u0026amp; Loggers\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2498\" data-start=\"2331\"\u003e\n\u003cli data-end=\"2411\" data-start=\"2331\"\u003e\n\u003cp data-end=\"2411\" data-start=\"2333\"\u003ePerfect for integrating with ACR’s AC Current Transducer (e.g., 250 A model)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2498\" data-start=\"2412\"\u003e\n\u003cp data-end=\"2498\" data-start=\"2414\"\u003eProvides the clean, isolated hot-line conductor needed for proper clamp measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2525\" data-start=\"2500\"\u003e\u003cstrong data-end=\"2523\" data-start=\"2504\"\u003e5. 15-Amp Rated\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2647\" data-start=\"2526\"\u003e\n\u003cli data-end=\"2585\" data-start=\"2526\"\u003e\n\u003cp data-end=\"2585\" data-start=\"2528\"\u003eSuitable for most small appliances and office equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2647\" data-start=\"2586\"\u003e\n\u003cp data-end=\"2647\" data-start=\"2588\"\u003eMatches the rating of typical North American 120 V circuits\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2692\" data-start=\"2649\"\u003e\u003cstrong data-end=\"2690\" data-start=\"2653\"\u003e6. Standard North American Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2740\" data-start=\"2693\"\u003e\n\u003cli data-end=\"2710\" data-start=\"2693\"\u003e\n\u003cp data-end=\"2710\" data-start=\"2695\"\u003e120 V \/ 60 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2740\" data-start=\"2711\"\u003e\n\u003cp data-end=\"2740\" data-start=\"2713\"\u003eThree-prong plug and outlet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2745\" data-start=\"2742\"\u003e\n\u003ch2 data-end=\"2779\" data-start=\"2747\"\u003e\u003cstrong data-end=\"2777\" data-start=\"2749\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-end=\"3070\" data-start=\"2820\"\u003e\n\u003cli data-end=\"2846\" data-start=\"2820\"\u003e\n\u003cp data-end=\"2846\" data-start=\"2822\"\u003e\u003cstrong data-end=\"2839\" data-start=\"2822\"\u003eMaximum load:\u003c\/strong\u003e 15 A\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2874\" data-start=\"2847\"\u003e\n\u003cp data-end=\"2874\" data-start=\"2849\"\u003e\u003cstrong data-end=\"2868\" data-start=\"2849\"\u003eMultiplier tap:\u003c\/strong\u003e 10×\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2922\" data-start=\"2875\"\u003e\n\u003cp data-end=\"2922\" data-start=\"2877\"\u003e\u003cstrong data-end=\"2894\" data-start=\"2877\"\u003eStandard tap:\u003c\/strong\u003e 1× (direct hot conductor)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2966\" data-start=\"2923\"\u003e\n\u003cp data-end=\"2966\" data-start=\"2925\"\u003e\u003cstrong data-end=\"2939\" data-start=\"2925\"\u003ePlug Type:\u003c\/strong\u003e NEMA 5-15P to NEMA 5-15R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3005\" data-start=\"2967\"\u003e\n\u003cp data-end=\"3005\" data-start=\"2969\"\u003e\u003cstrong data-end=\"2983\" data-start=\"2969\"\u003eFrequency:\u003c\/strong\u003e 50\/60 Hz compatible\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3070\" data-start=\"3006\"\u003e\n\u003cp data-end=\"3070\" data-start=\"3008\"\u003e\u003cstrong data-end=\"3025\" data-start=\"3008\"\u003eDesigned for:\u003c\/strong\u003e AC clamp-on meters and current transducers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-12-18T20:41:35-08:00","created_at":"2020-12-18T20:41:35-08:00","vendor":"ACR Systems","type":"","tags":["AC Current \u0026 Voltage"],"price":6500,"price_min":6500,"price_max":6500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37804119523499,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"38-0002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Line Splitter Multiplier - AC Current - For Appliance Monitoring","public_title":null,"options":["Default Title"],"price":6500,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191","\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-1.png?v=1763695563","\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-2.png?v=1763695563"],"featured_image":"\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191","options":["Title"],"media":[{"alt":null,"id":15547636187307,"position":1,"preview_image":{"aspect_ratio":0.37,"height":300,"width":111,"src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191"},"aspect_ratio":0.37,"height":300,"media_type":"image","src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191","width":111},{"alt":null,"id":32189509370027,"position":2,"preview_image":{"aspect_ratio":0.957,"height":650,"width":622,"src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-1.png?v=1763695563"},"aspect_ratio":0.957,"height":650,"media_type":"image","src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-1.png?v=1763695563","width":622},{"alt":null,"id":32189509337259,"position":3,"preview_image":{"aspect_ratio":1.058,"height":660,"width":698,"src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-2.png?v=1763695563"},"aspect_ratio":1.058,"height":660,"media_type":"image","src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-2.png?v=1763695563","width":698}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-end=\"317\" data-start=\"220\"\u003e\u003cstrong\u003eSafely and easily measure AC current on standard plug-in appliances — even very low currents.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"348\" data-start=\"319\"\u003e\u003cstrong data-end=\"346\" data-start=\"323\"\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"679\" data-start=\"349\"\u003eMost small appliances use a standard power cord that contains both the hot and neutral conductors bundled together. When you place a clamp-on current transducer (CT) around the entire cord, the opposing currents cancel each other out, giving you \u003cem data-end=\"622\" data-start=\"603\"\u003eno reading at all\u003c\/em\u003e.\u003cbr data-end=\"626\" data-start=\"623\"\u003eThe Line Splitter Multiplier solves this problem.\u003c\/p\u003e\n\u003cp data-end=\"936\" data-start=\"681\"\u003eThis compact accessory plugs in-line between an appliance and a North American 120 V outlet. It separates the hot conductor from the neutral so a clamp-on CT can measure the hot line directly — without any rewiring, cutting, or exposing wires.\u003c\/p\u003e\n\u003cp data-end=\"1095\" data-start=\"938\"\u003eThe splitter also includes a built-in 10× current multiplier. This allows low-current devices to produce a stronger, more measurable signal. For example:\u003c\/p\u003e\n\u003cul data-end=\"1384\" data-start=\"1097\"\u003e\n\u003cli data-end=\"1193\" data-start=\"1097\"\u003e\n\u003cp data-end=\"1193\" data-start=\"1099\"\u003eA device drawing 5–12 A becomes equivalent to 50–120 A when using the 10× multiplier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1273\" data-start=\"1194\"\u003e\n\u003cp data-end=\"1273\" data-start=\"1196\"\u003eThis lets you use a 250 A Current Transducer with excellent sensitivity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1384\" data-start=\"1274\"\u003e\n\u003cp data-end=\"1384\" data-start=\"1276\"\u003eTrendReader TRX Software can automatically correct the reading using a custom equation (simply divide by 10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1481\" data-start=\"1386\"\u003eThis Line Splitter is rated for up to 15 Amps, matching standard North American outlet limits.\u003c\/p\u003e\n\u003chr data-end=\"1486\" data-start=\"1483\"\u003e\n\u003ch2 data-end=\"1506\" data-start=\"1488\"\u003e\u003cstrong data-end=\"1506\" data-start=\"1490\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3 data-end=\"1576\" data-start=\"1508\"\u003e\u003cstrong data-end=\"1574\" data-start=\"1512\"\u003e1. Enables Current Measurement on Standard Appliance Cords\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1787\" data-start=\"1577\"\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003eSeparates hot and neutral conductors internally\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003ePrevents the cancellation effect that makes clamp-on CTs read “zero” on standard cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1787\" data-start=\"1724\"\u003e\n\u003cp data-end=\"1787\" data-start=\"1726\"\u003eIdeal for plug-in appliances, tools, and electronic equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1833\" data-start=\"1789\"\u003e\u003cstrong data-end=\"1831\" data-start=\"1793\"\u003e2. Built-In 10× Current Multiplier\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2042\" data-start=\"1834\"\u003e\n\u003cli data-end=\"1895\" data-start=\"1834\"\u003e\n\u003cp data-end=\"1895\" data-start=\"1836\"\u003eBoosts low-current readings for more accurate measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1967\" data-start=\"1896\"\u003e\n\u003cp data-end=\"1967\" data-start=\"1898\"\u003eGreatly improves resolution when monitoring small or variable loads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2042\" data-start=\"1968\"\u003e\n\u003cp data-end=\"2042\" data-start=\"1970\"\u003eTrendReader can automatically scale results using a simple divider (÷10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2099\" data-start=\"2044\"\u003e\u003cstrong data-end=\"2097\" data-start=\"2048\"\u003e3. Plug-In Convenience (No Rewiring Required)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2271\" data-start=\"2100\"\u003e\n\u003cli data-end=\"2166\" data-start=\"2100\"\u003e\n\u003cp data-end=\"2166\" data-start=\"2102\"\u003eSimply place the splitter between the outlet and the appliance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2211\" data-start=\"2167\"\u003e\n\u003cp data-end=\"2211\" data-start=\"2169\"\u003eNo cutting, splicing, or modifying cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2271\" data-start=\"2212\"\u003e\n\u003cp data-end=\"2271\" data-start=\"2214\"\u003eSafer and faster for technicians, engineers, and auditors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2330\" data-start=\"2273\"\u003e\u003cstrong data-end=\"2328\" data-start=\"2277\"\u003e4. Works With ACR Current Transducers \u0026amp; Loggers\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2498\" data-start=\"2331\"\u003e\n\u003cli data-end=\"2411\" data-start=\"2331\"\u003e\n\u003cp data-end=\"2411\" data-start=\"2333\"\u003ePerfect for integrating with ACR’s AC Current Transducer (e.g., 250 A model)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2498\" data-start=\"2412\"\u003e\n\u003cp data-end=\"2498\" data-start=\"2414\"\u003eProvides the clean, isolated hot-line conductor needed for proper clamp measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2525\" data-start=\"2500\"\u003e\u003cstrong data-end=\"2523\" data-start=\"2504\"\u003e5. 15-Amp Rated\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2647\" data-start=\"2526\"\u003e\n\u003cli data-end=\"2585\" data-start=\"2526\"\u003e\n\u003cp data-end=\"2585\" data-start=\"2528\"\u003eSuitable for most small appliances and office equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2647\" data-start=\"2586\"\u003e\n\u003cp data-end=\"2647\" data-start=\"2588\"\u003eMatches the rating of typical North American 120 V circuits\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2692\" data-start=\"2649\"\u003e\u003cstrong data-end=\"2690\" data-start=\"2653\"\u003e6. Standard North American Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2740\" data-start=\"2693\"\u003e\n\u003cli data-end=\"2710\" data-start=\"2693\"\u003e\n\u003cp data-end=\"2710\" data-start=\"2695\"\u003e120 V \/ 60 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2740\" data-start=\"2711\"\u003e\n\u003cp data-end=\"2740\" data-start=\"2713\"\u003eThree-prong plug and outlet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2745\" data-start=\"2742\"\u003e\n\u003ch2 data-end=\"2779\" data-start=\"2747\"\u003e\u003cstrong data-end=\"2777\" data-start=\"2749\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-end=\"3070\" data-start=\"2820\"\u003e\n\u003cli data-end=\"2846\" data-start=\"2820\"\u003e\n\u003cp data-end=\"2846\" data-start=\"2822\"\u003e\u003cstrong data-end=\"2839\" data-start=\"2822\"\u003eMaximum load:\u003c\/strong\u003e 15 A\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2874\" data-start=\"2847\"\u003e\n\u003cp data-end=\"2874\" data-start=\"2849\"\u003e\u003cstrong data-end=\"2868\" data-start=\"2849\"\u003eMultiplier tap:\u003c\/strong\u003e 10×\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2922\" data-start=\"2875\"\u003e\n\u003cp data-end=\"2922\" data-start=\"2877\"\u003e\u003cstrong data-end=\"2894\" data-start=\"2877\"\u003eStandard tap:\u003c\/strong\u003e 1× (direct hot conductor)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2966\" data-start=\"2923\"\u003e\n\u003cp data-end=\"2966\" data-start=\"2925\"\u003e\u003cstrong data-end=\"2939\" data-start=\"2925\"\u003ePlug Type:\u003c\/strong\u003e NEMA 5-15P to NEMA 5-15R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3005\" data-start=\"2967\"\u003e\n\u003cp data-end=\"3005\" data-start=\"2969\"\u003e\u003cstrong data-end=\"2983\" data-start=\"2969\"\u003eFrequency:\u003c\/strong\u003e 50\/60 Hz compatible\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3070\" data-start=\"3006\"\u003e\n\u003cp data-end=\"3070\" data-start=\"3008\"\u003e\u003cstrong data-end=\"3025\" data-start=\"3008\"\u003eDesigned for:\u003c\/strong\u003e AC clamp-on meters and current transducers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.general.search.loading
{"id":6149853511851,"title":"Line Splitter Multiplier - AC Current - For Appliance Monitoring","handle":"line-splitter-multiplier-ac-current","description":"\u003cp data-end=\"317\" data-start=\"220\"\u003e\u003cstrong\u003eSafely and easily measure AC current on standard plug-in appliances — even very low currents.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"348\" data-start=\"319\"\u003e\u003cstrong data-end=\"346\" data-start=\"323\"\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"679\" data-start=\"349\"\u003eMost small appliances use a standard power cord that contains both the hot and neutral conductors bundled together. When you place a clamp-on current transducer (CT) around the entire cord, the opposing currents cancel each other out, giving you \u003cem data-end=\"622\" data-start=\"603\"\u003eno reading at all\u003c\/em\u003e.\u003cbr data-end=\"626\" data-start=\"623\"\u003eThe Line Splitter Multiplier solves this problem.\u003c\/p\u003e\n\u003cp data-end=\"936\" data-start=\"681\"\u003eThis compact accessory plugs in-line between an appliance and a North American 120 V outlet. It separates the hot conductor from the neutral so a clamp-on CT can measure the hot line directly — without any rewiring, cutting, or exposing wires.\u003c\/p\u003e\n\u003cp data-end=\"1095\" data-start=\"938\"\u003eThe splitter also includes a built-in 10× current multiplier. This allows low-current devices to produce a stronger, more measurable signal. For example:\u003c\/p\u003e\n\u003cul data-end=\"1384\" data-start=\"1097\"\u003e\n\u003cli data-end=\"1193\" data-start=\"1097\"\u003e\n\u003cp data-end=\"1193\" data-start=\"1099\"\u003eA device drawing 5–12 A becomes equivalent to 50–120 A when using the 10× multiplier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1273\" data-start=\"1194\"\u003e\n\u003cp data-end=\"1273\" data-start=\"1196\"\u003eThis lets you use a 250 A Current Transducer with excellent sensitivity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1384\" data-start=\"1274\"\u003e\n\u003cp data-end=\"1384\" data-start=\"1276\"\u003eTrendReader TRX Software can automatically correct the reading using a custom equation (simply divide by 10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1481\" data-start=\"1386\"\u003eThis Line Splitter is rated for up to 15 Amps, matching standard North American outlet limits.\u003c\/p\u003e\n\u003chr data-end=\"1486\" data-start=\"1483\"\u003e\n\u003ch2 data-end=\"1506\" data-start=\"1488\"\u003e\u003cstrong data-end=\"1506\" data-start=\"1490\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3 data-end=\"1576\" data-start=\"1508\"\u003e\u003cstrong data-end=\"1574\" data-start=\"1512\"\u003e1. Enables Current Measurement on Standard Appliance Cords\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1787\" data-start=\"1577\"\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003eSeparates hot and neutral conductors internally\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003ePrevents the cancellation effect that makes clamp-on CTs read “zero” on standard cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1787\" data-start=\"1724\"\u003e\n\u003cp data-end=\"1787\" data-start=\"1726\"\u003eIdeal for plug-in appliances, tools, and electronic equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1833\" data-start=\"1789\"\u003e\u003cstrong data-end=\"1831\" data-start=\"1793\"\u003e2. Built-In 10× Current Multiplier\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2042\" data-start=\"1834\"\u003e\n\u003cli data-end=\"1895\" data-start=\"1834\"\u003e\n\u003cp data-end=\"1895\" data-start=\"1836\"\u003eBoosts low-current readings for more accurate measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1967\" data-start=\"1896\"\u003e\n\u003cp data-end=\"1967\" data-start=\"1898\"\u003eGreatly improves resolution when monitoring small or variable loads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2042\" data-start=\"1968\"\u003e\n\u003cp data-end=\"2042\" data-start=\"1970\"\u003eTrendReader can automatically scale results using a simple divider (÷10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2099\" data-start=\"2044\"\u003e\u003cstrong data-end=\"2097\" data-start=\"2048\"\u003e3. Plug-In Convenience (No Rewiring Required)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2271\" data-start=\"2100\"\u003e\n\u003cli data-end=\"2166\" data-start=\"2100\"\u003e\n\u003cp data-end=\"2166\" data-start=\"2102\"\u003eSimply place the splitter between the outlet and the appliance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2211\" data-start=\"2167\"\u003e\n\u003cp data-end=\"2211\" data-start=\"2169\"\u003eNo cutting, splicing, or modifying cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2271\" data-start=\"2212\"\u003e\n\u003cp data-end=\"2271\" data-start=\"2214\"\u003eSafer and faster for technicians, engineers, and auditors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2330\" data-start=\"2273\"\u003e\u003cstrong data-end=\"2328\" data-start=\"2277\"\u003e4. Works With ACR Current Transducers \u0026amp; Loggers\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2498\" data-start=\"2331\"\u003e\n\u003cli data-end=\"2411\" data-start=\"2331\"\u003e\n\u003cp data-end=\"2411\" data-start=\"2333\"\u003ePerfect for integrating with ACR’s AC Current Transducer (e.g., 250 A model)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2498\" data-start=\"2412\"\u003e\n\u003cp data-end=\"2498\" data-start=\"2414\"\u003eProvides the clean, isolated hot-line conductor needed for proper clamp measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2525\" data-start=\"2500\"\u003e\u003cstrong data-end=\"2523\" data-start=\"2504\"\u003e5. 15-Amp Rated\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2647\" data-start=\"2526\"\u003e\n\u003cli data-end=\"2585\" data-start=\"2526\"\u003e\n\u003cp data-end=\"2585\" data-start=\"2528\"\u003eSuitable for most small appliances and office equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2647\" data-start=\"2586\"\u003e\n\u003cp data-end=\"2647\" data-start=\"2588\"\u003eMatches the rating of typical North American 120 V circuits\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2692\" data-start=\"2649\"\u003e\u003cstrong data-end=\"2690\" data-start=\"2653\"\u003e6. Standard North American Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2740\" data-start=\"2693\"\u003e\n\u003cli data-end=\"2710\" data-start=\"2693\"\u003e\n\u003cp data-end=\"2710\" data-start=\"2695\"\u003e120 V \/ 60 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2740\" data-start=\"2711\"\u003e\n\u003cp data-end=\"2740\" data-start=\"2713\"\u003eThree-prong plug and outlet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2745\" data-start=\"2742\"\u003e\n\u003ch2 data-end=\"2779\" data-start=\"2747\"\u003e\u003cstrong data-end=\"2777\" data-start=\"2749\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-end=\"3070\" data-start=\"2820\"\u003e\n\u003cli data-end=\"2846\" data-start=\"2820\"\u003e\n\u003cp data-end=\"2846\" data-start=\"2822\"\u003e\u003cstrong data-end=\"2839\" data-start=\"2822\"\u003eMaximum load:\u003c\/strong\u003e 15 A\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2874\" data-start=\"2847\"\u003e\n\u003cp data-end=\"2874\" data-start=\"2849\"\u003e\u003cstrong data-end=\"2868\" data-start=\"2849\"\u003eMultiplier tap:\u003c\/strong\u003e 10×\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2922\" data-start=\"2875\"\u003e\n\u003cp data-end=\"2922\" data-start=\"2877\"\u003e\u003cstrong data-end=\"2894\" data-start=\"2877\"\u003eStandard tap:\u003c\/strong\u003e 1× (direct hot conductor)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2966\" data-start=\"2923\"\u003e\n\u003cp data-end=\"2966\" data-start=\"2925\"\u003e\u003cstrong data-end=\"2939\" data-start=\"2925\"\u003ePlug Type:\u003c\/strong\u003e NEMA 5-15P to NEMA 5-15R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3005\" data-start=\"2967\"\u003e\n\u003cp data-end=\"3005\" data-start=\"2969\"\u003e\u003cstrong data-end=\"2983\" data-start=\"2969\"\u003eFrequency:\u003c\/strong\u003e 50\/60 Hz compatible\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3070\" data-start=\"3006\"\u003e\n\u003cp data-end=\"3070\" data-start=\"3008\"\u003e\u003cstrong data-end=\"3025\" data-start=\"3008\"\u003eDesigned for:\u003c\/strong\u003e AC clamp-on meters and current transducers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-12-18T20:41:35-08:00","created_at":"2020-12-18T20:41:35-08:00","vendor":"ACR Systems","type":"","tags":["AC Current \u0026 Voltage"],"price":6500,"price_min":6500,"price_max":6500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37804119523499,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"38-0002","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Line Splitter Multiplier - AC Current - For Appliance Monitoring","public_title":null,"options":["Default Title"],"price":6500,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191","\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-1.png?v=1763695563","\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-2.png?v=1763695563"],"featured_image":"\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191","options":["Title"],"media":[{"alt":null,"id":15547636187307,"position":1,"preview_image":{"aspect_ratio":0.37,"height":300,"width":111,"src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191"},"aspect_ratio":0.37,"height":300,"media_type":"image","src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/products\/3445_400_300.jpg?v=1610165191","width":111},{"alt":null,"id":32189509370027,"position":2,"preview_image":{"aspect_ratio":0.957,"height":650,"width":622,"src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-1.png?v=1763695563"},"aspect_ratio":0.957,"height":650,"media_type":"image","src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-1.png?v=1763695563","width":622},{"alt":null,"id":32189509337259,"position":3,"preview_image":{"aspect_ratio":1.058,"height":660,"width":698,"src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-2.png?v=1763695563"},"aspect_ratio":1.058,"height":660,"media_type":"image","src":"\/\/www.acrdatasolutions.com\/cdn\/shop\/files\/ALS-1-2.png?v=1763695563","width":698}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-end=\"317\" data-start=\"220\"\u003e\u003cstrong\u003eSafely and easily measure AC current on standard plug-in appliances — even very low currents.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"348\" data-start=\"319\"\u003e\u003cstrong data-end=\"346\" data-start=\"323\"\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"679\" data-start=\"349\"\u003eMost small appliances use a standard power cord that contains both the hot and neutral conductors bundled together. When you place a clamp-on current transducer (CT) around the entire cord, the opposing currents cancel each other out, giving you \u003cem data-end=\"622\" data-start=\"603\"\u003eno reading at all\u003c\/em\u003e.\u003cbr data-end=\"626\" data-start=\"623\"\u003eThe Line Splitter Multiplier solves this problem.\u003c\/p\u003e\n\u003cp data-end=\"936\" data-start=\"681\"\u003eThis compact accessory plugs in-line between an appliance and a North American 120 V outlet. It separates the hot conductor from the neutral so a clamp-on CT can measure the hot line directly — without any rewiring, cutting, or exposing wires.\u003c\/p\u003e\n\u003cp data-end=\"1095\" data-start=\"938\"\u003eThe splitter also includes a built-in 10× current multiplier. This allows low-current devices to produce a stronger, more measurable signal. For example:\u003c\/p\u003e\n\u003cul data-end=\"1384\" data-start=\"1097\"\u003e\n\u003cli data-end=\"1193\" data-start=\"1097\"\u003e\n\u003cp data-end=\"1193\" data-start=\"1099\"\u003eA device drawing 5–12 A becomes equivalent to 50–120 A when using the 10× multiplier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1273\" data-start=\"1194\"\u003e\n\u003cp data-end=\"1273\" data-start=\"1196\"\u003eThis lets you use a 250 A Current Transducer with excellent sensitivity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1384\" data-start=\"1274\"\u003e\n\u003cp data-end=\"1384\" data-start=\"1276\"\u003eTrendReader TRX Software can automatically correct the reading using a custom equation (simply divide by 10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1481\" data-start=\"1386\"\u003eThis Line Splitter is rated for up to 15 Amps, matching standard North American outlet limits.\u003c\/p\u003e\n\u003chr data-end=\"1486\" data-start=\"1483\"\u003e\n\u003ch2 data-end=\"1506\" data-start=\"1488\"\u003e\u003cstrong data-end=\"1506\" data-start=\"1490\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3 data-end=\"1576\" data-start=\"1508\"\u003e\u003cstrong data-end=\"1574\" data-start=\"1512\"\u003e1. Enables Current Measurement on Standard Appliance Cords\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1787\" data-start=\"1577\"\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003eSeparates hot and neutral conductors internally\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1632\" data-start=\"1577\"\u003e\n\u003cp data-end=\"1632\" data-start=\"1579\"\u003ePrevents the cancellation effect that makes clamp-on CTs read “zero” on standard cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1787\" data-start=\"1724\"\u003e\n\u003cp data-end=\"1787\" data-start=\"1726\"\u003eIdeal for plug-in appliances, tools, and electronic equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"1833\" data-start=\"1789\"\u003e\u003cstrong data-end=\"1831\" data-start=\"1793\"\u003e2. Built-In 10× Current Multiplier\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2042\" data-start=\"1834\"\u003e\n\u003cli data-end=\"1895\" data-start=\"1834\"\u003e\n\u003cp data-end=\"1895\" data-start=\"1836\"\u003eBoosts low-current readings for more accurate measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1967\" data-start=\"1896\"\u003e\n\u003cp data-end=\"1967\" data-start=\"1898\"\u003eGreatly improves resolution when monitoring small or variable loads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2042\" data-start=\"1968\"\u003e\n\u003cp data-end=\"2042\" data-start=\"1970\"\u003eTrendReader can automatically scale results using a simple divider (÷10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2099\" data-start=\"2044\"\u003e\u003cstrong data-end=\"2097\" data-start=\"2048\"\u003e3. Plug-In Convenience (No Rewiring Required)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2271\" data-start=\"2100\"\u003e\n\u003cli data-end=\"2166\" data-start=\"2100\"\u003e\n\u003cp data-end=\"2166\" data-start=\"2102\"\u003eSimply place the splitter between the outlet and the appliance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2211\" data-start=\"2167\"\u003e\n\u003cp data-end=\"2211\" data-start=\"2169\"\u003eNo cutting, splicing, or modifying cords\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2271\" data-start=\"2212\"\u003e\n\u003cp data-end=\"2271\" data-start=\"2214\"\u003eSafer and faster for technicians, engineers, and auditors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2330\" data-start=\"2273\"\u003e\u003cstrong data-end=\"2328\" data-start=\"2277\"\u003e4. Works With ACR Current Transducers \u0026amp; Loggers\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2498\" data-start=\"2331\"\u003e\n\u003cli data-end=\"2411\" data-start=\"2331\"\u003e\n\u003cp data-end=\"2411\" data-start=\"2333\"\u003ePerfect for integrating with ACR’s AC Current Transducer (e.g., 250 A model)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2498\" data-start=\"2412\"\u003e\n\u003cp data-end=\"2498\" data-start=\"2414\"\u003eProvides the clean, isolated hot-line conductor needed for proper clamp measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2525\" data-start=\"2500\"\u003e\u003cstrong data-end=\"2523\" data-start=\"2504\"\u003e5. 15-Amp Rated\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2647\" data-start=\"2526\"\u003e\n\u003cli data-end=\"2585\" data-start=\"2526\"\u003e\n\u003cp data-end=\"2585\" data-start=\"2528\"\u003eSuitable for most small appliances and office equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2647\" data-start=\"2586\"\u003e\n\u003cp data-end=\"2647\" data-start=\"2588\"\u003eMatches the rating of typical North American 120 V circuits\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"2692\" data-start=\"2649\"\u003e\u003cstrong data-end=\"2690\" data-start=\"2653\"\u003e6. Standard North American Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"2740\" data-start=\"2693\"\u003e\n\u003cli data-end=\"2710\" data-start=\"2693\"\u003e\n\u003cp data-end=\"2710\" data-start=\"2695\"\u003e120 V \/ 60 Hz\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2740\" data-start=\"2711\"\u003e\n\u003cp data-end=\"2740\" data-start=\"2713\"\u003eThree-prong plug and outlet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"2745\" data-start=\"2742\"\u003e\n\u003ch2 data-end=\"2779\" data-start=\"2747\"\u003e\u003cstrong data-end=\"2777\" data-start=\"2749\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-end=\"3070\" data-start=\"2820\"\u003e\n\u003cli data-end=\"2846\" data-start=\"2820\"\u003e\n\u003cp data-end=\"2846\" data-start=\"2822\"\u003e\u003cstrong data-end=\"2839\" data-start=\"2822\"\u003eMaximum load:\u003c\/strong\u003e 15 A\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2874\" data-start=\"2847\"\u003e\n\u003cp data-end=\"2874\" data-start=\"2849\"\u003e\u003cstrong data-end=\"2868\" data-start=\"2849\"\u003eMultiplier tap:\u003c\/strong\u003e 10×\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2922\" data-start=\"2875\"\u003e\n\u003cp data-end=\"2922\" data-start=\"2877\"\u003e\u003cstrong data-end=\"2894\" data-start=\"2877\"\u003eStandard tap:\u003c\/strong\u003e 1× (direct hot conductor)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2966\" data-start=\"2923\"\u003e\n\u003cp data-end=\"2966\" data-start=\"2925\"\u003e\u003cstrong data-end=\"2939\" data-start=\"2925\"\u003ePlug Type:\u003c\/strong\u003e NEMA 5-15P to NEMA 5-15R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3005\" data-start=\"2967\"\u003e\n\u003cp data-end=\"3005\" data-start=\"2969\"\u003e\u003cstrong data-end=\"2983\" data-start=\"2969\"\u003eFrequency:\u003c\/strong\u003e 50\/60 Hz compatible\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3070\" data-start=\"3006\"\u003e\n\u003cp data-end=\"3070\" data-start=\"3008\"\u003e\u003cstrong data-end=\"3025\" data-start=\"3008\"\u003eDesigned for:\u003c\/strong\u003e AC clamp-on meters and current transducers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}